The dryer has become an indispensable appliance in many homes, allowing you to have laundry dry in a short time, regardless of the external climatic conditions, but among the various components of this precious appliance, there is an element often neglected but of fundamental importance: The filter of the hands. This small detail, when it does not receive the right attention, can cause significant problems not only to the appliance itself, but also to the safety of the domestic environment.
What is the strap filter and how it works
The strap filter, also called an antipelucchi filter, is an essential component of the dryer designed to capture fiber, plugs and hands that detach themselves from the tissues during the drying process. Typically positioned in the front or higher of the appliance, this network filter retains the textile residues by preventing them from reaching the engine or dryer exhaust system.
During each drying cycle, the garments release surprising quantities of fibers which, if not adequately filtered, can accumulate inside the appliance. The filter acts as a first defense line, collecting this material before it can cause more serious problems. Its simplicity of operation hides a crucial role in the efficiency of the entire system.
What happens if the filter is not cleaned
The inattention to this component can lead to numerous problems, often underestimated by the owners of the dryers:
Reduction of energy efficiency
An clogged filter forces the dryer to work more intensely to complete the drying cycle. This translates into significantly greater energy consumption, with consequent increase in electric bills. A obstructed filter is estimated to increase energy consumption of up to 30%.
Prolonged drying times
When the air flow is hindered by a clogged filter, the dryer takes much more time to dry the garments. This not only increases energy consumption, but also submits fabrics to prolonged heat that can deteriorate them prematurely.
Overheating of the appliance
The obstruction of the filter prevents correct air circulation, causing a overheating of the dryer. This phenomenon can seriously damage the internal components of the appliance, reducing the overall duration.
Premature engine of the engine
When the filter is clogged, the dryer engine must work at higher regimes to maintain air circulation. This additional effort accelerates the wear of the engine, bringing to expensive repairs or the need to replace the entire appliance.
5. ** Fire risk **: The most serious and dangerous consequence of a non -clean filter is the increased risk of fire. The accumulation of hands, highly flammable material, combined with the heat generated during drying, creates ideal conditions for the trigger of a domestic fire.
The ideal frequency of cleaning the filter
Maintenance of the strap filter does not require particular commitment, but requires constancy. Experts agree unanimously on a fundamental rule: the filter should be cleaned after each drying cycle, without exception.
This habit, although it may seem excessive, actually requires only a few seconds of your time and effectively prevents all the problems previously listed. In addition, cleaning when the filter still contains hot hands is simpler, since the material is more easily removed than when it has cooled and compacted.
For families with an intensive use of dryer or that frequently dry items that release a lot of hands (such as towels, new clothes or hairy clothing), this practice becomes even more important.
How to correctly clean the strap filter
The cleaning of the filter is not a complex operation, but it must be performed carefully following these steps:
Removal of the surface flue
After each drying cycle, extract the filter and gently remove the drunk layer with the fingers or with a soft brush. The collected hand can be disposed of in the waste bin.
More in -depth periodic cleaning
Once a month, in addition to ordinary cleaning, it is advisable to wash the filter with warm water and a delicate detergent to remove invisible residues as detergent particles, fabric softener or natural oils issued by the fabrics. These residues can create a patina that reduces the effectiveness of the filter even when it appears visually clean.
Full drying
Before reinserting the filter in the dryer, make sure it is completely dry. A wet filter can compromise the efficiency of drying and potentially damage the appliance.
Inspection of the filter headquarters
Occasionally, also check the venue that houses the filter, removing any accumulation of fluff with a vacuum cleaner with a narrow nozzle or with a special brush.
Verification of integrity
During cleaning, check that the filter does not present tears or damage that could compromise its functionality. In case of damaged filter, it is necessary to replace it immediately.
What are the signals indicating a clogged filter
Even if regular cleaning should prevent problems, it is useful to know the signals that indicate an obstructed filter:
The presence of one or more of these signals requires immediate intervention, not only to restore the efficiency of the appliance but also to prevent more serious damage.
How to clean the unloading and conduct of the ACIUGATOR
While the straightener filter represents the first line of defense, it is important to remember that part of the hands can still reach the exhaust system. For complete maintenance of the dryer, it is advisable:
1. Clean the external exhaust: at least once a year, check and clean the outdoor outlet of the dryer external drain, removing accumulations of flour that could block the air flow.
2. Check the exhaust duct: The tube or conduct that connects the dryer to the external nozzle should be inspected and clean annually, preferably by a qualified technician. Obstructed ducts represent a serious risk of often underestimated fire.
3. Consider a professional cleaning: For the dryers used intensively or in the case of particularly long or complex exhaust ducts, professional cleaning every 2-3 years can be a sensible investment for domestic safety.
Which are the advantages of correct maintenance
Regular care of the strange filter is not only a question of security, but also of domestic economy. A well maintained dryer:
Considering that the average cost of a quality dryer is around 400-800 euros, correct maintenance can represent considerable savings in the long term.
The dryer’s dryer filter is the perfect example of how a small detail, often ignored in daily frenzy, can have a significant impact on energy efficiency, domestic safety and duration of the appliances.
The good news is that maintenance requires a minimum commitment: a few seconds are enough after each drying cycle to remove the accumulated hands. This simple gesture, transformed into habit, can prevent expensive and potentially dangerous problems.
